Realease 7 of 3GPP has been designed as an upgrade for existing HSPA networks and is called HSPA+. The release 7 of 3GPP introduces MIMO (Multiple Input,Multiple Output) dan 64QAM to increase data rate of the air interface. 3GPP is now developing the standards for new mobile network, called Long Term Evolution (LTE) and system Architecture Evolution (SAE) for next generation mobile networks, this is next step in the continuous move to wider bandwidth an higher data rates.

LTE is a new technology, and the specifications are still evolving, a close working relationship between the test equipment,wireless device and chipset designers is required to synchronize feature implementation, reference specifications and timely delivery of the test equipment software.

For analyzing MIMO and LTE signals, signal analyzers enable detailed testing of the physical layer. The signal analyzers can be equipped with option for LTE and MIMO allowing simultaneous processing of signals transmmited by multiple antennas. They can also be used to determine whether pre-coding for LTE signals works across the different stages.

To ensure this technology's optimal operation requires the engineer to accurately test the MIMO receiver a challenging task given the large combination of variables the must be tested in a given MIMO configuration A critical part of testing a MIMO receiver is replicating real-world conditions and channels and performing real-time fading of MIMO signals.

Fourth-generation telecommunications services (4G) technology Long Term Evolution (LTE) for the first time it is commercially launched by TeliaSonera in cooperation with Ericsson in Stockholm, Sweden, Monday, December 14, 2009. This commercial launch earlier than previously planned targets. "A new era of mobile broadband has just started today. With LTE, which is also referred to as 4G, and broadband experience you move to a higher level. Speed LTE gives you a sense of easy access to broadband," said Carl-Hendric Svanvberg, President and CEO of Ericsson.

LTE is designed to move the amount of data is very large in a way efficient, optimize bandwidth usage, and lifting speed as fast wireless access using optical fiber. In any case, customers can enjoy online services for both HD video media, network games, and other multimedia services with ease while moving. "We are very proud to be the world's first operator to offer 4G services to our customers. Thank you for a successful cooperation with Ericsson, we can offer 4G services to our customers in Stockholm earlier than originally planned," said Kenneth Karlberg, President and Head of Mobility Services, TeliaSonera.

LTE networks built Ericsson reach all parts of Stockholm city center and is the largest LTE coverage so far. Ericsson to supply TeliaSonera LTE system (4G), including LTE-based radio station, which is part of a recent series RBS6000, an Evolved Packet Core network, including mobile backhaul solution successor SmartEdge 1200, multi-access unit is the latest EDA button, and a solution operations and system management. LTE system is based on 3GPP standards for radio technology Long Term Evolution (LTE) and the Evolved Packet Core technology (EPC).

After the successful launch 4G services (LTE / Long Term Evolution) first in the world, TeliaSonera telephone operators operating in the Nordic countries and the Balkans, began to expand its services to all regions of Norway and Sweden. Mid-December 2009, 4G (LTE) when introduced to a new customer can be enjoyed in downtown Stockholm, and now 25 cities in Sweden and four biggest cities in Norway, including Oslo, also began to enjoy the fourth-generation technology services. So far, the Nordic region has a tradition of placing it in the forefront for the development of telecommunications.

Through technology 4G/LTE of TeliaSonera, this area was back in front. Currently TeliaSonera offers its customers a broadband network next-generation technology with wireless access to interactive services and the demands of high capacity services such as real-time web, online gaming, social media collaboration and video conferencing.

At present the use of broadband in the Nordic region are soaring and TeliaSonera with the support of Ericsson's offering to meet the demand for 4G data rates and high capacity.

To date, Ericsson has signed contracts with four commercial LTE big operators, including Verizon Wireless and MetroPCS in the United States, NTT DoCoMo in Japan and TeliaSonera in Sweden. LTE which is mentioned is the next generation of mobile communications technology, enabling the transfer of very large data with a quick, efficient and cost effective, optimize the use of frequency spectrum.

With increased speed and reduced latency, customers can enjoy whatever services are available online as a web of real-time, online game, social media collaboration and video conferencing, power and easily while on the move. LTE will meet the demand for new Internet applications and higher in the future.

Ericsson has pioneered wireless technology and led the development of LTE. Together with NTT DoCoMo, Ericsson initiated the standardization of LTE with the international standardization body 3GPP in 2004, and has made the largest number of approved contributions to the group. Ericsson also berekspektasi to hold 25 percent of all patents essential to LTE, making it the largest patent holder in the industry.

The LTE physical layer comprises two types of signals known as physical signals and physical channels. Physical signals are generated in Layer 1 and used for system synchronization, cell identification, and radio channel estimation. Physical channels carry data from higher layers including control, scheduling, and user payload. The uplink physical signals and channels.

Uplink Frame Structure There are two uplink frame structures, one for FDD operation called type 1 and the other for FDD operation called type 2. Frame structure type 1 is 10 ms long and consists of ten subframes, each comprising two 0.5 ms slots. Figure 1 shows how the DMRS and PUSCH map onto the frame structure.

The number of symbols in a slot depends on the CP length. For a normal CP, there are seven SC-FDMA symbols per slot. For an extended CP used for when the delay spread is large, there are six SC-FDMA symbols per slot. Demodulation reference signals are transmitted in the fourth symbol (that is, symbol number 3) of every slot. The PUSCH can be transmitted in any other symbol. Figure 2 shows the uplink frame structure type 1 in both frequency and time.













Figure 1. Frame Structure 1 for uplink showing mapping for DMRS and PUSCH

















Figure 2. Frame Structure 1 for the uplink showing one subframe vs.frequency.





Each vertical bar represents one subcarrier. Transmissions are allocated in units called resource blocks (RB) comprising 12 adjacent subcarriers for a period of 0.5 ms. In addition to the DMRS and PUSCH the figure also shows the PUCCH which is always allocated to the edge RB of the channel bandwidth alternating from low to high frequency on adjacent slots.

Note that the frequency allocation for one UE is typically less than the system bandwidth. This is because the number of RB allocated directly scales to the transmitted data rate which may not always be the maximum. The DMRS is only transmitted within the PUSCH and PUCCH frequency allocation-unlike the reference signals on the downlink which are always transmitted across the entire channel bandwidth even if the channel is not fully occupied.

If the base station needs to estimate the uplink channel conditions when no control or payload data is scheduled then it will allocate the SRS which is independent of the PUSCH and PUCCH. The PUSCH can be modulated at QPSK, 16QAM or 64QAM. The PUCCH is only QPSK and the DMRS is BPSK with a 45 degree rotation.

Analyzing an SC-FDMA Signal
Figure 3 shows some of the measurements that can be made on a typical SC-FDMA signal using the Agilent 89601A Vector Signal Analyzer software. The IQ constellation in trace A (top left) shows that this is a 16QAM signal. The unity circle represents the DMRS occurring every seventh symbol, which are phase-modulated using an orthogonal Zadoff-Chu sequence.

Trace B (lower left) shows signal power versus frequency. The frequency scale is in 15 kHz sub-carriers numbered from -600 to 599, which represents a bandwidth of 18 MHz or 100 RB. The nominal channel bandwidth is therefore 20 MHz and the allocated signal bandwidth is 5 MHz towards the lower end. The brown dots represent the instantaneous subcarrier amplitude and the white dots the average over 10 ms.

In the center of the trace, the spike represents the local oscillator (LO) leakage - IQ offset - of the signal; the large image to the right is an OFDM artifact deliberately created using 0.5 dB IQ gain imbalance in the signal. Both the LO leakage and the power in non-allocated sub-carriers will be limited by the 3GPP specifications. Trace C (top middle) shows a summary of the measured impairments including the error vector magnitude (EVM), frequency error, and IQ offset.

Note the data EVM at 1.15 percent is much higher than the DMRS EVM at 0.114 percent. This is due to a +0.1 dB boost in the data power as reported in trace E, which for this example was ignored by the receiver to create data-specific EVM. Also note the DMRS po.



wer boost is reported as +1 dB, which can also be observed in the IQ constellation because the unity circle does not pass through eight of the 16QAM points. Trace D (lower middle) shows the distribution of EVM by subcarrier. The average and peak of the allocated signal EVM is in line with the numbers in trace C. The EVM for the non-allocated subcarriers reads much higher, although this impairment will be specified with a new “in-band emission” requirement as a power ratio between the allocated RB and unallocated RB.

The ratio for this particular signal is around 30 dB as trace B shows. The blue dots in trace D also show the EVM of the DMRS, which is very low.Trace E (top right) shows a measurement of EVM by modulation type from one capture. This signal uses only the DMRS phase modulation and 16QAM so the QPSK and 64QAM results are blank.

Finally, trace F (lower right) shows the PAR — the whole point of SC-FDMA — in the form of a complementary cumulative distribution function (CCDF) measurement. It is not possible to come up with a single figure of merit for the PAR advantage of SC-FDMA over OFDMA because it depends on the data rate. The PAR of OFDMA is always higher than SC-FDMA even for narrow frequency allocations;

however, when data rates rise and the frequency allocation gets wider, the SC-FDMA PAR remains constant but OFDMA gets worse and approaches Gaussian noise. A 5 MHz OFDMA 16QAM signal would look very much like Gaussian noise.

From the white trace it can be seen at 0.01 percent probability the SC-FDMA signal is 3 dB better than the blue Gaussian reference trace. As every amplifier designer knows, shaving even a tenth of a decibel shaved from the peak power budget is a significant improvement.





Included in this comprehensive suite of LTE tools are solutions to design and simulate LTE signals, create and measure LTE encoded signals with sources and analyzers, and test mixed analog & digital signals – see figure 4. Just added to Agilent’s suite of LTE solutions is a one-box tester that provides the platform for protocol design and test solutions, in partnership with Anite.

This platform will provide RF and protocol conformance test systems when they are needed. And, the newly introduced signaling analyzer enables analysis of the new LTE/SAE network.

About the mysterious appearance of the iPhone like a puzzle with the generation that must be drawn up piece by piece. Well, the latest piece of information from Apple's phone, was related to size. Information circulated mention when the iPhone 4G will be larger in size than the previous generation iPhone 3GS. Sizes may differ from previous technology generation and if this is true, then this is the latest of Apple's history, because there has not yet been created out of the iPhone as a standard design now.

iPhone 4G will use a lighter material than the previous iPhone, which is made of metal. Sensitive plastic materials in the iPhone 4G is already in use at the Magic Mouse Apple recently released.In addition the camera on the handset will also be upgraded to 5 Megapixels from the 3.2 Megapixels who now use the iPhone 3GS. Thus, the quality is not lost with Nexus One newly released Google.

After conducting extensive testing of devices from various suppliers in the laboratory and in the field, AT&T choose to continue the cooperation with Ericsson to implement LTE. The agreement is also part of AT&T's strategy to continue to improve the speed and performance of mobile broadband technologies of 3G to deliver the best experience for customers by further evolution of GSM technology is the latest Next Generation Technology of LTE.

As part of the long-term agreement, Ericsson is extending its position as the most important supplier for AT&T to supply network devices from the Next Generation Technologies LTE and a series of services in design, deploy, and optimize the LTE network. AT&T plans to conduct field trials for the next generation technology from LTE at the end of this year and commercial implementation is scheduled to begin in 2011.

"This is an important stage of the broadband strategy for our future, ie with a focus to bring the best combination of speed, performance, and availability of devices for customers at every stage of technology implementation," said John Stankey, president and CEO of AT&T Operations. According to him, AT&T has an important advantage in the next generation of technology that LTE is an evolution of GSM technology to support our network and the majority of wireless infrastructure in the world today.

"Our ability to work together to meet market demands quickly become an important element in getting the trust from AT&T. We will work hard for the success of the launch of next-generation LTE and supports AT&T in business services and introduce new consumers into the future," said Hans Vestberg, president and CEO of Ericsson. AT&T formerly known as one of Ericsson's products and services supplier based access to the world's leading cable. Ericsson can offer cable-based solutions to accelerate the ability of AT&T in presenting new products and services based broadband to market.

Today, Ericsson has signed a commercial contract with LTE four leading operators in the world, two of which operators in the United States, LTE market the fastest growing in the world. Next generation technology from recent LTE mobile communication, allowing large data transfers very quickly, efficiently and cheaply through the optimization of the frequency spectrum. With increased speed and reduced latency, enabling customers to enjoy a variety of applications such as web in real time, online games, social media collaboration and video conferencing easily wherever and whenever located. LTE technology will meet the demands of Internet applications more advanced moves in the future.

Ericsson continued to encourage open standards and provide the greatest impact for the launch of LTE specifications. Ericsson hopes will hold 25 percent of important patents for LTE, which makes the largest patent holder in the industry. LTE is an evolution of network-generation advanced wireless technologies pioneered Ericsson with AT&T since two decades ago and is one of the main focus of the AT&T innovate and invest in broadband technology. AT&T serves more than 85.1 million subscribers and has seen the growth of broadband in the last three years. Smartphones just be one example of innovation resulting from investment in broadband technology.