MSC-Mobile Switching Center
Mobile Service Switching Center have important functions in switching communication in the entire MS in the MSC area. Such as setting up, routing, supervising calls to and from MS.
MSC-Mobile Service Switching Center functions:
- Establish a connection and traffic signaling.
- Billing: Recording of the duration of speech.
- Pagging: The process of giving signals to the BTS, which has the frequency with the same frequency signal MSC issued with the purpose to find the Subscriber calling.
- Handover: This process can also occur in the MSC. The process of handover to the MSC called the inter handover MSC.
- Access to the data base to PLMN (VLR, HLR, EIR).
- Implement security functions.
Data Transmision MSC contains Interface (DTI), which is implemented on a GSM interworking function (IWF). DTI to handle data functions such as data conversion rate.
MSC / VLR implemented on AXE as follows:
• MSS (Mobile Switching Subsystem) handle and to set up the call, charging implemented for supporting function and the gateway GMSC on roaming.
• MMS (Mobile Mobility and Radio Subsystem) handle up date location, authentication and chippering access to all the radio. handle requests handover and paging. Save information about the cell and torture.
• MMS creation (Mobile Data Subsystem) Save the data received by the HLR.
• SHA (Short Message Service Subsystem) Contains the Short Message Service (SMS).
Currently have 0 comments: